F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

4
Figure 3 Creating an interface
3. Configure the interface information as described in Table 1.
4. Click Apply.
Table 1 Configuration items
Item Descri
p
tion
Interface Name
Set the name for the interface or its subinterface.
• If you select a logical interface type from the list, such as LoopBack,
Vlan-interface, and Virtual-Template, set the interface number in the box
behind to create the logical interface.
• If you select a specific Ethernet interface name from the list, such as
GigabitEthernet 0/1, set the subinterface number in the box behind to
create a subinterface of the Ethernet interface.
VID
Set the VLAN ID associated with the subinterface.
This parameter is available on a subinterface of a Layer 3 Ethernet
subinterface in the previous step.
MTU Set the MTU of the interface.
TCP MSS Set the maximum segment size for TCP on the interface.