F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

172
Figure 115 RIP global configuration page
2. Configure RIP globally as described in Table 16.
3. Click Apply.
Table 16 Configuration items
Item Descri
p
tion
Enable RIP (enable all interfaces automatically) Enable RIP on all interfaces.
Import static routes Configure RIP to redistribute active static routes.
Configuring interface RIP
1. Select Network > RIP from the navigation tree.
The RIP configuration page appears. If RIP is enabled, the More button is displayed.
2. Click More.
The hidden RIP interface list appears.
Figure 116 Interface configuration page
3. Click the icon.
The RIP interface configuration page appears.