F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

202
Field Descri
p
tion
Area ID ID of the area to which the interface belongs.
Cost Cost for the interface.
Network Type Network type for the interface.
DR Priority DR priority for the interface.
State
Current state of the interface:
• Down—No packet is sent or received through the interface.
• Loopback—The interface is in loopback state. A loopback interface can only
collect interface information.
• Waiting—The interface starts to send and receive Hello packets and attempts to
find the DR and BDR on the network.
• P-2-P—The interface will send Hello packets at the hello interval, and attempts to
establish adjacency with the peer router.
• DR—The router is a designated router (DR) of the network.
• BDR—The router backup designated router (BDR) of the network.
• DROther—The router is neither a DR nor a BDR of the network.
Displaying OSPF neighbor information
1. Select Network > OSPF from the navigation tree.
The OSPF configuration page appears.
2. After you complete OSPF area configurations, click Show Peer on the Show Information tab.
The OSPF neighbor information is displayed.
Figure 132 Displaying OSPF neighbor information
Table 22 Field description
Field Descri
p
tion
Peer Router ID ID of the neighbor router.
IP Address IP address of the neighbor router.
DR Priority DR priority of the neighbor router.