F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

232
10.1.1.0/24 2 Inter 10.3.1.1 10.3.1.1 0.0.0.2
Total Nets: 5
Intra Area: 2 Inter Area: 3 ASE: 0 NSSA: 0
# Ping 10.4.1.1 to test connectivity.
[LB] ping 10.4.1.1
PING 10.4.1.1: 56 data bytes, press CTRL_C to break
Reply from 10.4.1.1: bytes=56 Sequence=2 ttl=253 time=2 ms
Reply from 10.4.1.1: bytes=56 Sequence=2 ttl=253 time=1 ms
Reply from 10.4.1.1: bytes=56 Sequence=3 ttl=253 time=1 ms
Reply from 10.4.1.1: bytes=56 Sequence=4 ttl=253 time=1 ms
Reply from 10.4.1.1: bytes=56 Sequence=5 ttl=253 time=1 ms
--- 10.4.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/2 ms
Configuring OSPF route redistribution
1. Network requirements
• Enable OSPF on all the devices.
• Split the AS into three areas.
• Configure Router A and Router B as ABRs.
• Configure LB as an ASBR to redistribute external routes (static routes).
Figure 142 Network diagram
2. Configuration procedure
a. Configure IP addresses for interfaces. (Details not shown.)
b. Configure basic OSPF (see "Configuring basic OSPF").
c. Configure OSPF to redistribute routes:
# On LB, configure a static route destined for network 3.1.2.0/24.
<LB> system-view
[LB] ip route-static 3.1.2.1 24 10.4.1.2
# On LB, configure OSPF to redistribute the static route.