F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

241

Figure 146 Network diagram

2. Configuration procedure

a. Configure IP addresses for interfaces. (Details not shown.)

b. Configure basic OSPF:

# Configure LB.

<LB> system-view

[LB] router id 1.1.1.1

[LB] ospf

[LB-ospf-1] area 0

[LB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255

[LB-ospf-1-area-0.0.0.0] quit

[LB-ospf-1] quit

# Configure Router A.

<RouterA> system-view

[RouterA] router id 2.2.2.2

[RouterA] ospf

[RouterA-ospf-1] area 0

[RouterA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255

[RouterA-ospf-1-area-0.0.0.0] quit

[RouterA-ospf-1] quit

# Configure Router B.

<RouterB> system-view

[RouterB] router id 3.3.3.3

[RouterB] ospf

[RouterB-ospf-1] area 0

[RouterB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255

[RouterB-ospf-1-area-0.0.0.0] quit

[RouterB-ospf-1] quit

# Configure Router C.

<RouterC> system-view

[RouterC] router id 4.4.4.4

[RouterC] ospf

[RouterC-ospf-1] area 0

[RouterC-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255

[RouterC-ospf-1-area-0.0.0.0] quit

[RouterC-ospf-1] return