F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

254
Figure 155 Web page displayed after you enable BGP
b. Select the Enable BGP box, and enter 65008 for AS.
c. Click Apply.
3. Configure EBGP connections:
a. Click Add in the Peer Configuration field.
The BGP peer configuration page appears.
Figure 156 Adding a BGP peer
b. Enter 200.1.1.1 for Peer IP Address and 65009 for Peer AS.
c. Click Apply.
Configuring Device B
See the configuration pages of Device A for reference.
1. Configure IP addresses for interfaces. (Details not shown.)
2. Enable BGP:
a. Select Network > BGP from the navigation tree of Device B.
The BGP global configuration page appears.