F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

284
Task Command Remarks
Display BGP routing statistics.
display bgp routing-table statistic [ | { begin | exclude
| include } regular-expression ]
Available in
any view.
Display the global router ID.
display router id [ | { begin | exclude | include }
regular-expression ]
Available in
any view.
Resetting BGP session
Task Command Remarks
Reset the specified BGP
session.
reset bgp { as-number | ip-address | all
| external | group group-name |
internal }
Available in user view.
Reset all IPv4 unicast BGP
sessions.
reset bgp ipv4 all Available in any view.
Clearing BGP information
Task Command Remarks
Clear dampened BGP
routing information and
release suppressed routes.
reset bgp dampening [ ip-address
[ mask | mask-length ] ]
Available in user view.
Clear route flap information.
reset bgp flap-info [ ip-address
[ mask-length | mask ] | as-path-acl
as-path-acl-number | regexp
as-path-regular-expression ]
reset bgp peer-ip-address flap-info
Available in user view.
BGP configuration examples
BGP basic configuration example
1. Network requirements
In Figure 162, run EB
GP between Router A and LB, and run IBGP between LB and Router B so that Router
B can access the network 8.1.1.0/24 connected to Router A.
Figure 162 Network diagram
2. Configuration procedure
a. Configure IP addresses for interfaces. (Details not shown.)