F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module

301

302

303

304

305

306

307

308

309

310

295

Destinations : 10 Routes : 10

Destination/Mask Proto Pre Cost NextHop Interface

3.3.3.3/32 Direct 0 0 127.0.0.1 InLoop0

10.220.2.0/24 Direct 0 0 10.220.2.16 GE0/1

10.220.2.16/32 Direct 0 0 127.0.0.1 InLoop0

127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0

127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0

172.17.100.0/24 Direct 0 0 172.17.100.2 GE0/2

172.17.100.2/32 Direct 0 0 127.0.0.1 InLoop0

192.168.64.0/24 O_ASE 150 1 172.17.100.1 GE0/2

192.168.74.0/24 O_ASE 150 1 172.17.100.1 GE0/2

192.168.99.0/24 O_ASE 150 1 172.17.100.1 GE0/2

The output shows that LB has learned routes to 192.168.64.0/24, 192.168.74.0/24, and

192.168.99.0/24 through OSPF.

d. Configure BGP between LB and Router C, and configure BGP on LB to redistribute OSPF

routes:

# On LB, enable BGP, specify Router C as an EBGP peer, and configure BGP to redistribute OSPF

routes.

[LB] bgp 65106

[LB-bgp] router-id 3.3.3.3

[LB-bgp] peer 10.220.2.217 as-number 64631

[LB-bgp] import-route ospf

# Configure LB as an EBGP peer on Router C.

[RouterC] bgp 64631

[RouterC-bgp] router-id 4.4.4.4

[RouterC-bgp] peer 10.220.2.16 as-number 65106

[RouterC-bgp] quit

# Display routing table information on Router C.

[RouterC] display ip routing-table

Routing Tables: Public

Destinations : 8 Routes : 8

Destination/Mask Proto Pre Cost NextHop Interface

4.4.4.4/32 Direct 0 0 127.0.0.1 InLoop0

10.220.2.0/24 Direct 0 0 10.220.2.217 GE0/1

10.220.2.217/32 Direct 0 0 127.0.0.1 InLoop0

127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0

127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0

192.168.64.0/24 BGP 255 1 10.220.2.16 GE0/1

192.168.74.0/24 BGP 255 1 10.220.2.16 GE0/1

192.168.99.0/24 BGP 255 1 10.220.2.16 GE0/1

The output shows that Router C has learned routes to 192.168.64.0/24, 192.168.74.0/24, and

192.168.99.0/24 through BGP.