F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

310
Displaying and maintaining an IPv4 routing table at
the CLI
Task Command Remarks
Display routing table information.
display ip routing-table [ verbose ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display information about routes
permitted by an IPv4 basic ACL.
display ip routing-table acl acl-number
[ verbose ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display information about routes to
a specific destination address.
display ip routing-table ip-address [ mask
| mask-length ] [ longer-match ]
[ verbose ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display information about routes to
a range of destination addresses.
display ip routing-table ip-address1
{ mask | mask-length } ip-address2 { mask
| mask-length } [ verbose ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display information about routes
permitted by an IPv4 prefix list.
display ip routing-table ip-prefix
ip-prefix-name [ verbose ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display information about routes
installed by a routing protocol.
display ip routing-table protocol protocol
[ inactive | verbose ] [ | { begin | exclude
| include } regular-expression ] [ | { begin
| exclude | include } regular-expression ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display IPv4 route statistics.
display ip routing-table statistics [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Clear IPv4 route statistics.
reset ip routing-table statistics protocol
{ protocol | all }
Available in user view.