F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

317
Figure 175 PBR application page
3. Click Add.
The page for applying a policy appears.
Figure 176 Applying a policy
4. Enable local PBR or interface PBR as described in Table 31.
5. Click Apply.
Table 31 Configuration items
Item Descri
p
tion
Apply to
Specify the policy application mode:
• Local—Enable local PBR. Unless otherwise required, do not enable local PBR.
• Interface—Enable interface PBR. Apply the policy on a selected interface.
Policy Name Enter the name of the policy to be applied.
PBR configuration example
Network requirements
As shown in Figure 177, configure PBR on LB to send TCP packets received from GigabitEthernet 0/3 to
the next hop 1.1.2.2 (Router A), and other packets based on the routing table.