F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

362
Ste
p
Command Remarks
1. Enter system view. system-view N/A
2. Enable dynamic domain
name resolution.
dns resolve Disabled by default.
3. Specify a DNS server.
dns server ipv6
ipv6-address
[ interface-type
interface-number ]
Not specified by default.
If the IPv6 address of a DNS server is a
link-local address, you need to specify the
interface-type and interface-number arguments.
4. Configure a DNS suffix. dns domain domain-name
Optional.
Not configured by default. Only the provided
domain name is resolved.
Displaying and maintaining IPv6 DNS
Task Command Remarks
Display the static IPv6 domain
name resolution table.
display ipv6 host [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display IPv6 DNS server
information.
display dns ipv6 server [ dynamic ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display DNS suffixes.
display dns domain [ dynamic ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display the information of
dynamic IPv6 domain name
cache.
display dns host ipv6 [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Clear the information of
dynamic IPv6 domain name
cache.
reset dns host ipv6 Available in user view.
Static domain name resolution configuration
example
Network requirements
As shown in Figure 193, LB wants to access the host by using an easy-to-remember domain name rather
than an IPv6 address. Configure static domain name resolution on LB so that LB can use the domain
name host.com to access the host whose IPv6 address is 1::2.
Figure 193 Network diagram