F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

364
Figure 194 Network diagram
Configuration procedure
Before performing the following configuration, make sure LB and the host are accessible to each other
through available routes, and the IPv6 addresses of the interfaces are configured as shown Figure 194.
This
configuration may vary with DNS servers. The following configuration is performed on a PC running
Windows Server 2003. Make sure the DNS server supports the IPv6 DNS function so that the server can
process IPv6 DNS packets, and the interfaces of the DNS server can forward IPv6 packets.
1. Configure the DNS server:
a. Select Start > Programs > Administrative Tools > DNS.
The DNS server configuration page appears, as shown in Figure 195.
b. Right-click Forward Lookup Zones, select New Zone, and then follow the wizard to create a
new zone named com.
Figure 195 Creating a zone
c. On the DNS configuration page, right-click zone com, and select Other New Records.