F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

367
Figure 198 Adding a mapping between domain name and IPv6 address
2. Configure the DNS client:
# Enable dynamic domain name resolution.
<LB> system-view
[LB] dns resolve
# Specify the DNS server 2::2.
[LB] dns server ipv6 2::2
# Configure com as the DNS suffix.
[LB] dns domain com
Verifying the configuration
# Use the ping ipv6 host command on LB to verify that the communication between LB and the host is
normal and that the corresponding destination IP address is 1::1.
[LB] ping ipv6 host
Trying DNS resolve, press CTRL_C to break
Trying DNS server (2::2)
PING host.com (1::1):
56 data bytes, press CTRL_C to break
Reply from 1::1
bytes=56 Sequence=1 hop limit=126 time = 2 ms
Reply from 1::1