F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

393
Disabling interfaces from receiving and sending OSPFv3
packets
Follow these guidelines when you disable interfaces from receiving and sending OSPFv3 packets:
• Multiple OSPFv3 processes can disable the same interface from receiving and sending OSPFv3
packets. Using the silent-interface command disables only the interfaces associated with the current
process.
• After an OSPF interface is set to silent, direct routes of the interface can still be advertised in
Intra-Area-Prefix-LSAs through other interfaces, but other OSPFv3 packets cannot be advertised. No
neighboring relationship can be established on the interface. This feature can enhance the
adaptability of OSPFv3 networking.
To disable interfaces from receiving and sending OSPFv3 packets:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter OSPFv3 view.
ospfv3 [ process-id ] N/A
3. Disable interfaces from
receiving and sending
OSPFv3 packets.
silent-interface { interface-type
interface-number | all }
Not disabled by default.
Enabling the logging of neighbor state changes
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter OSPFv3 view.
ospfv3 [ process-id ] N/A
3. Enable the logging of
neighbor state changes.
log-peer-change Enabled by default.
Displaying and maintaining OSPFv3
Task Command Remarks
Display OSPFv3 process brief
information.
display ospfv3 [ process-id ] [ | { begin | exclude |
include } regular-expression ]
Available in
any view.
Display OSPFv3 interface
information.
display ospfv3 interface [ interface-type
interface-number | statistic ] [ | { begin | exclude |
include } regular-expression ]
Available in
any view.
Display OSPFv3 LSDB information.
display ospfv3 [ process-id ] lsdb [ { external | grace |
inter-prefix | inter-router | intra-prefix | link | network
| router } [ link-state-id ] [ originate-router router-id ] |
total ] [ | { begin | exclude | include }
regular-expression ]
Available in
any view.
Display OSPFv3 LSDB statistics.
display ospfv3 lsdb statistic [ | { begin | exclude |
include } regular-expression ]
Available in
any view.