F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module

395

Figure 202 Network diagram

Configuration procedure

1. Configure IPv6 addresses for interfaces. (Details not shown.)

2. Configure OSPFv3 basic functions:

# Configure Router A.

<RouterA> system-view

[RouterA] ipv6

[RouterA] ospfv3 1

[RouterA-ospfv3-1] router-id 1.1.1.1

[RouterA-ospfv3-1] quit

[RouterA] interface gigabitethernet 0/1

[RouterA-GigabitEthernet0/1] ospfv3 1 area 1

[RouterA-GigabitEthernet0/1] quit

[RouterA] interface gigabitethernet 0/2

[RouterA-GigabitEthernet0/2] ospfv3 1 area 1

[RouterA-GigabitEthernet0/2] quit

# Configure Router B.

<RouterB> system-view

[RouterB] ipv6

[RouterB] ospfv3 1

[RouterB-ospfv3-1] router-id 2.2.2.2

[RouterB-ospfv3-1] quit

[RouterB] interface gigabitethernet 0/1

[RouterB-GigabitEthernet0/1] ospfv3 1 area 0

[RouterB-GigabitEthernet0/1] quit

[RouterB] interface gigabitethernet 0/2

[RouterB-GigabitEthernet0/2] ospfv3 1 area 1

[RouterB-GigabitEthernet0/2] quit

# Configure Router C.

<RouterC> system-view

[RouterC] ipv6

[RouterC] ospfv3 1

[RouterC-ospfv3-1] router-id 3.3.3.3

[RouterC-ospfv3-1] quit

[RouterC] interface gigabitethernet 0/1

Stub

OSPFv3

Area 0

OSPFv3

Area 1

OSPFv3

Area 2

Router A

GE0/1

2001::2/64

GE0/1

2001::1/64

GE0/1

2001:3::1/64

GE0/2

2001:1::2/64

Router C

GE0/2

2001:2::1/64

GE0/2

2001:2::2/64

Router B

GE0/2

2001:1::1/64

LB