F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

407
Task Remarks
Controlling route distribution
and reception
Configuring IPv6 BGP route redistribution Optional.
Configuring IPv6 BGP route summarization Optional.
Advertising a default route to an IPv6 peer or peer
group
Optional.
Configuring outbound route filtering Optional.
Configuring inbound route filtering Optional.
Configuring IPv6 BGP and IGP route
synchronization
Optional.
Configuring route dampening Optional.
Configuring IPv6 BGP route
attributes
Configuring IPv6 BGP preference and default
LOCAL_PREF and NEXT_HOP attributes
Optional.
Configuring the MED attribute Optional.
Configuring the AS_PATH attribute Optional.
Tuning and optimizing IPv6
BGP networks
Configuring IPv6 BGP timers Optional.
Configuring IPv6 BGP soft reset Optional.
Enabling the IPv6 BGP ORF capability Optional.
Enabling 4-byte AS number suppression Optional.
Configuring the maximum number of ECMP routes Optional.
Enabling MD5 authentication for TCP connections Optional.
Configuring a large-scale IPv6
BGP network
Configuring IPv6 BGP peer group Optional.
Configuring IPv6 BGP community Optional.
Configuring an IPv6 BGP route reflector Optional.
Configuring IPv6 BGP basic functions
Configuration prerequisites
Before you configure IPv6 BGP basic functions, complete the following tasks:
• Specify IP addresses for interfaces.
• Enable IPv6 with the ipv6 command in system view.
• Create a peer group before configuring basic functions for it. For related information, see
"Configuring IPv6 BGP peer group."
Specifying an IPv6 BGP peer
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view. bgp as-number N/A