F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

410
Configuring a description for an IPv6 peer or peer group
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter IPv6 address family
view.
ipv6-family N/A
4. Configure a description for an
IPv6 peer or peer group.
peer { ipv6-group-name | ipv6-address }
description description-text
Optional.
Not configured by default.
The peer group to be
configured with a
description must have been
created.
Disabling session establishment to an IPv6 peer or peer group
Ste
p
Command Remarks
1. Enter system view. system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter IPv6 address family view.
ipv6-family N/A
4. Disable session establishment to an
IPv6 peer or peer group.
peer { ipv6-group-name |
ipv6-address } ignore
Optional.
Not disabled by default.
Logging IPv6 peer or peer group state changes
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view. bgp as-number N/A
3. Enable logging of peer
changes globally.
log-peer-change
Optional.
Enabled by default.
4. Enter IPv6 address family
view.
ipv6-family N/A
5. Enable the state change
logging for an IPv6 peer or
peer group.
peer { ipv6-group-name |
ipv6-address } log-change
Optional.
Enabled by default.
For information about the
command, see Network
Management Command
Reference.