F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

449
To configure a continue clause for a routing policy:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Create a routing policy and
enter routing policy view.
route-policy route-policy-name
{ deny | permit } node node-number
Not created by default.
3. Specify the next node to be
matched.
continue [ node-number ]
Optional.
Not configured by default.
The specified next node must
have a larger number than the
current node.
Displaying and maintaining the routing policy
Task Command Remarks
Display BGP AS path list
information.
display ip as-path [ as-path-number ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display BGP community list
information.
display ip community-list
[ basic-community-list-number |
adv-community-list-number | comm-list-name ] [ |
{ begin | exclude | include } regular-expression ]
Available in any
view.
Display BGP extended community
list information.
display ip extcommunity-list
[ ext-comm-list-number ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display IPv4 prefix list statistics.
display ip ip-prefix [ ip-prefix-name ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display IPv6 prefix list statistics.
display ip ipv6-prefix [ ipv6-prefix-name ] [ |
{ begin | exclude | include } regular-expression ]
Available in any
view.
Display routing policy information.
display route-policy [ route-policy-name ] [ | { begin
| exclude | include } regular-expression ]
Available in any
view.
Clear IPv4 prefix list statistics. reset ip ip-prefix [ ip-prefix-name ]
Available in user
view.
Clear IPv6 prefix list statistics. reset ip ipv6-prefix [ ipv6-prefix-name ]
Available in user
view.
Routing policy configuration examples
Applying a routing policy to IPv6 route redistribution
Network requirements
• In Figure 210, enable RIPng on LB and Router.
• Configure three static routes on LB.