F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

39
Configuration procedure
# Create forward-type inline Layer 2 forwarding entry 1.
<Sysname> system-view
[Sysname] inline-interfaces 1
# Assign GigabitEthernet 0/1 to forward-type inline Layer 2 forwarding entry 1.
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] port inline-interfaces 1
[Sysname-GigabitEthernet0/1] quit
# Assign GigabitEthernet 0/2 to forward-type inline Layer 2 forwarding entry 1.
[Sysname] interface gigabitethernet 0/2
[Sysname-GigabitEthernet0/2] port inline-interfaces 1
Blackhole-type inline Layer 2 forwarding configuration
example
Network requirements
Configure blackhole-type inline Layer 2 forwarding on GigabitEthernet 0/1. Then packets received on
GigabitEthernet 0/1 are directly dropped.
Configuration procedure
# Create blackhole-type inline Layer 2 forwarding entry 1.
<Sysname> system-view
[Sysname] inline-interfaces 1 blackhole
# Assign GigabitEthernet 0/1 to blackhole-type inline Layer 2 forwarding entry 1.
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] port inline-interfaces 1