F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

46
Figure 27 Modifying a VLAN
3. Modify the member ports of the VLAN as described in Table 5.
4. Click Apply.
Table 5 Configuration items
Item Descri
p
tion
ID Displays the ID of the VLAN to be modified.
Description
Set the description of the VLAN.
By default, the description of a VLAN is its VLAN vlan-id, where vlan-id is the ID of the
VLAN. For example, the default description of VLAN 100 is VLAN 0100.
Port
Untagged
Member
Set the member type of the port to be modified in the VLAN.
Find the port to be modified and select the Untagged Member, Tagged Member, or
Not a Member option for the port:
• Untagged Member—The port sends the traffic of the VLAN with the VLAN tag
removed.
• Tagged Member—The port sends the traffic of the VLAN without removing the
VLAN tag.
• Not a Member—The port is removed from the VLAN.
When you configure an access port as a tagged member of a VLAN, the link type of the
port is automatically changed into hybrid.
Tagged
Member
Not a
Member
Modifying a port
1. Select Network > VLAN from the navigation tree, and then click the Port tab.
The page as shown in Figure 28 appears.
Figure 28 Port configurat
ion page
2. In the Operation column, click the icon for the port to be modified to enter the page for
modifying the port, as shown in Figure 29.