F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

49
a.
Click the icon for GigabitEthernet 0/1 in the Operation column.
The page as shown in Figure 33 appears.
b. Select the Untagged option for Member Type.
c. Enter VLAN IDs 2, 6-50.
d. Click Apply.
A dialog box appears telling you that the access port will be changed into a hybrid port.
e. Click OK in the dialog box.
Figure 33 Assigning GigabitEthernet 0/1 to VLAN 2 and VLANs 6 through 50 as an untagged member
4. Assign GigabitEthernet 0/1 to VLAN 100 as a tagged member:
a. Select Network > VLAN from the navigation tree.
b. Enter 100 in the VLAN Range field.
c. Click Select.
The page is as shown in Figure 34.
Figure 34 VLAN configuration page
d. Click the icon for VLAN 100 in the Operation column.
The page shown in Figure 35 appears.
e. Select the Tagged Member option for GigabitEthernet 0/1.
f. Click Apply.