F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

51
Figure 36 Displaying the port statistics of GigabitEthernet 0/1
Configuring VLANs at the CLI
Configuring basic VLAN settings
Configuration restrictions and guidelines
• As the default VLAN, VLAN 1 cannot be created or removed.
• You cannot manually create or remove VLANs reserved for special purposes.
Configuration procedure
To configure basic VLAN settings:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a VLAN and
enter its view, or create
VLANs in batch.
vlan { vlan-id1 [ to vlan-id2 ] |
all }
Optional.
By default, only the default VLAN (VLAN 1)
exists in the system.
3. Enter VLAN view. vlan vlan-id
Required only when you create VLANs in
bulk.