F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

63
Verifying the configuration
# Display the isolate-user-VLAN configuration on LB A.
[LBA] display isolate-user-vlan
Isolate-user-VLAN VLAN ID : 5
Secondary VLAN ID : 2-3
VLAN ID: 5
VLAN Type: static
Isolate-user-VLAN type : isolate-user-VLAN
Route Interface: not configured
Description: VLAN 0005
Name: VLAN 0005
Tagged Ports: none
Untagged Ports:
GigabitEthernet0/1 GigabitEthernet0/2 GigabitEthernet0/3
VLAN ID: 2
VLAN Type: static
Isolate-user-VLAN type : secondary
Route Interface: not configured
Description: VLAN 0002
Name: VLAN 0002
Tagged Ports: none
Untagged Ports:
GigabitEthernet0/2 GigabitEthernet0/3
VLAN ID: 3
VLAN Type: static
Isolate-user-VLAN type : secondary
Route Interface: not configured
Description: VLAN 0003
Name: VLAN 0003
Tagged Ports: none
Untagged Ports:
GigabitEthernet0/1 GigabitEthernet0/3
Isolate-user-VLAN configuration example
(approach 2)
Network requirements
As shown in Figure 41, connect the device to downstream devices LB A and LB B.
Configure VLAN 5 on LB A as an isolate-user-VLAN, assign uplink port GigabitEthernet 0/3 to VLAN 5,
and associate VLAN 5 with secondary VLANs VLAN 2 and VLAN 3. Assign GigabitEthernet 0/2 to
VLAN 2 and GigabitEthernet 0/1 to VLAN 3.