F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

[LBA-GigabitEthernet0/2] port hybrid pvid vlan 2

[LBA-GigabitEthernet0/2] quit

# Associate the isolate-user-VLAN with the secondary VLANs.

[LBA] isolate-user-vlan 5 secondary 2 to 3

2. Configure LB B:

# Configure the isolate-user-VLAN.

<LBB> system-view

[LBB] vlan 6

[LBB-vlan6] isolate-user-vlan enable

[LBB-vlan6] quit

# Create secondary VLANs.

[LBB] vlan 3 to 4

# Configure uplink port GigabitEthernet 0/3.

[LBB] interface gigabitethernet 0/3

[LBA-GigabitEthernet0/3] port link-mode bridge

[LBB-GigabitEthernet0/3] port link-type hybrid

[LBB-GigabitEthernet0/3] port hybrid vlan 3 4 6 untagged

[LBB-GigabitEthernet0/3] port hybrid pvid vlan 6

[LBB-GigabitEthernet0/3] quit

# Configure downlink ports GigabitEthernet 0/1 and GigabitEthernet 0/2.

[LBB] interface gigabitethernet 0/1

[LBA-GigabitEthernet0/1] port link-mode bridge

[LBB-GigabitEthernet0/1] port link-type hybrid

[LBB-GigabitEthernet0/1] port hybrid vlan 3 6 untagged

[LBB-GigabitEthernet0/1] port hybrid pvid vlan 3

[LBB-GigabitEthernet0/1] quit

[LBB] interface gigabitethernet 0/2

[LBA-GigabitEthernet0/2] port link-mode bridge

[LBB-GigabitEthernet0/2] port link-type hybrid

[LBB-GigabitEthernet0/2] port hybrid vlan 4 6 untagged

[LBB-GigabitEthernet0/2] port hybrid pvid vlan 4

[LBB-GigabitEthernet0/2] quit

# Associate the isolate-user-VLAN with the secondary VLANs.

[LBB] isolate-user-vlan 6 secondary 3 to 4

Verifying the configuration

# Display the isolate-user-VLAN configuration on LB A.

[LBA] display isolate-user-vlan

Isolate-user-VLAN VLAN ID : 5

Secondary VLAN ID : 2-3

VLAN ID: 5

VLAN Type: static

Isolate-user-VLAN type : isolate-user-VLAN

Route Interface: not configured

Description: VLAN 0005

Name: VLAN 0005