F3215-HP Load Balancing Module Security Command Reference-6PW101

97
[Sysname] radius scheme radius1
[Sysname-radius-radius1] state secondary authentication block
Related commands
• display radius scheme
• state primary
stop-accounting-buffer enable (RADIUS scheme view)
Use stop-accounting-buffer enable to enable the device to buffer stop-accounting requests to which no
responses are received.
Use undo stop-accounting-buffer enable to disable the buffering function.
Syntax
stop-accounting-buffer enable
undo stop-accounting-buffer enable
Default
The device buffers stop-accounting requests to which no responses are received.
Views
RADIUS scheme view
Default command level
2: System level
Usage guidelines
Stop-accounting requests affect the charge to users. A NAS must make its best effort to send every
stop-accounting request to the RADIUS accounting servers. For each stop-accounting request that
receives no response in the specified period of time, the NAS buffers and resends the packet until it
receives a response or the number of transmission attempts reaches the configured limit. In the latter case,
the NAS discards the packet. However, if you have removed the accounting server, stop-accounting
messages are not buffered.
Examples
# Enable the device to buffer the stop-accounting requests to which no responses are received.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] stop-accounting-buffer enable
Related commands
• reset stop-accounting-buffer
• display stop-accounting-buffer
timer quiet (RADIUS scheme view)
Use timer quiet to set the quiet timer for servers.
Use undo timer quiet to restore the default.
Syntax
timer quiet minutes