F3215-HP Load Balancing Module Security Command Reference-6PW101

101
If a RADIUS scheme defines that the username is sent without the ISP domain name, do not apply the
RADIUS scheme to more than one ISP domain, avoiding the confused situation where the RADIUS server
regards two users in different ISP domains but with the same userid as one.
Examples
# Specify the device to remove the domain name in the username sent to the RADIUS servers for the
RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] user-name-format without-domain
Related commands
radius scheme
vpn-instance (RADIUS scheme view)
Use vpn-instance to specify a VPN instance for a RADIUS scheme.
Use undo vpn-instance to remove the configuration.
Syntax
vpn-instance vpn-instance-name
undo vpn-instance
Views
RADIUS scheme view
Default command level
2: System level
Parameters
vpn-instance-name: Name of the VPN, a case-sensitive string of 1 to 31 characters.
Usage guidelines
The VPN instance specified here applies to all IPv4 servers in the RADIUS scheme for which no specific
VPN instance is specified. The VPN instance specified here has no effect on IPv6 RADIUS servers.
Examples
# Specify VPN instance test for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] vpn-instance test
Related commands
display radius scheme
HWTACACS configuration commands
data-flow-format (HWTACACS scheme view)
Use data-flow-format to set the traffic statistics unit for data flows or packets.