F3215-HP Load Balancing Module Security Command Reference-6PW101

167
undo pki certificate access-control-policy { policy-name | all }
Default
No access control policy exists by default.
Views
System view
Default command level
2: System level
Parameters
policy-name: Name of the certificate attribute-based access control policy, a case-insensitive string of 1
to 16 characters. It cannot be "a", "al", or "all".
all: Specifies all certificate attribute-based access control policies.
Examples
# Configure an access control policy named mypolicy and enter its view.
<Sysname> system-view
[Sysname] pki certificate access-control-policy mypolicy
[Sysname-pki-cert-acp-mypolicy]
pki certificate attribute-group
Use pki certificate attribute-group to create a certificate attribute group and enter its view.
Use undo pki certificate attribute-group to delete one or all certificate attribute groups.
Syntax
pki certificate attribute-group group-name
undo pki certificate attribute-group { group-name | all }
Default
No certificate attribute group exists.
Views
System view
Default command level
2: System level
Parameters
group-name: Name for the certificate attribute group, a case-insensitive string of 1 to 16 characters. It
cannot be "a", "al", or "all".
all: Specifies all certificate attribute groups.
Examples
# Create a certificate attribute group named mygroup and enter its view.
<Sysname> system-view
[Sysname] pki certificate attribute-group mygroup
[Sysname-pki-cert-attribute-group-mygroup]