F3215-HP Load Balancing Module Security Command Reference-6PW101

200
Usage guidelines
If neither source IP address nor source interface is specified for the Stelnet client, the system displays the
message "Neither source IP address nor source interface was specified for the Stelnet client."
Examples
# Display the source IP address or source interface set for the Stelnet client.
<Sysname> display ssh client source
The source IP address you specified is 192.168.0.1
Related commands
ssh client source
display ssh server-info
Use display ssh server-info on a client to display mappings between SSH servers and their host public
keys on an SSH client.
NOTE:
This command is also available on an SFTP client.
Syntax
display ssh server-info [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see System Management Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
When an SSH client needs to authenticate the SSH server, it uses the locally saved public key of the
server for the authentication. If the authentication fails, you can use this command to check the public key
of the server saved on the client.
Examples
# Display the mappings between SSH servers and their host public keys on the client.
<Sysname> display ssh server-info
Server Name(IP) Server public key name
______________________________________________________
192.168.0.1 abc_key01
192.168.0.2 abc_key02