F3215-HP Load Balancing Module Security Command Reference-6PW101

210
Views
System view
Default command level
3: Manage level
Parameters
interface interface-type interface-number: Specifies a source interface by its type and number.
ip ip-address: Specifies a source IPv4 address.
Usage guidelines
To make sure the SFTP client and the SFTP server can communicate with each other, and to improve the
manageability of SFTP clients in the authentication service, HP recommends you to specify a loopback
interface as the source interface.
Examples
# Specify the source IP address of the SFTP client as 192.168.0.1.
<Sysname> system-view
[Sysname] sftp client source ip 192.168.0.1
Related commands
display sftp client source
sftp ipv6
Use sftp ipv6 to establish a connection to an IPv6 SFTP server and enter SFTP client view.
Syntax
sftp ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ prefer-compress { zlib |
zlib-openssh } | prefer-ctos-cipher { 3des | aes128 | des } | prefer-ctos-hmac { md5 | md5-96 | sha1
| sha1-96 } | prefer-kex { dh-group-exchange | dh-group1 | dh-group14 } | prefer-stoc-cipher { 3des
| aes128 | des } | prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 } ] *
Views
User view
Default command level
3: Manage level
Parameters
server: IPv6 address or host name of the server, a case-insensitive string of 1 to 46 characters.
port-number: Port number of the server, in the range of 0 to 65535. The default is 22.
vpn-instance vpn-instance-name: Specifies the VPN that the server belongs to, where the
vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the server is on the public
network, do not specify this option.
prefer-compress: Specifies the preferred compression algorithm. By default, the compression algorithm is
not used.
• zlib: Specifies the compression algorithm ZLIB.
• zlib-openssh: Specifies the compression algorithm [e-mail].