F3215-HP Load Balancing Module Security Command Reference-6PW101

232
Views
System view
Default command level
2: System level
Parameters
bytes-value: Byte count threshold for session logging, in the range of 1 to 1000 megabytes.
Examples
# Set the byte count threshold for session logging to 10 megabytes.
<Sysname> system-view
[Sysname] session log byte-active 10
session log enable
Use session log enable to enable the session logging function.
Use undo session log enable to disable the specified session logging function.
Syntax
session log enable [ acl acl-number ]
undo session log enable [ acl acl-number ]
Default
Interzone session logging is disabled.
Views
Interzone view
Default command level
2: System level
Parameters
acl acl-number: Specifies an ACL by its number, in the range of 2000 to 3999. If no ACL is specified, this
command enables logging all sessions through the interzone.
Examples
# Create an interzone instance from security zone Trust to security zone Untrust, and enable interzone
session logging.
<Sysname> system-view
[Sysname] interzone source Trust destination Untrust
[Sysname-interzone-Trust-Untrust] session log enable
Related commands
interzone
session log packets-active
Use session log packets-active to set the packet count threshold for session logging.
Use undo session log packets-active to restore the default.