F3215-HP Load Balancing Module Security Command Reference-6PW101

17
Field Descri
p
tion
2 times matched
There have been two matches for the rule. The statistic counts only ACL
matches performed in software.
This field is not displayed when no packets have matched the rule.
No statistics resource
Resources are not enough for counting matches for the rules. The device does
not support counting rule matches.
Uncompleted
Applying the rule to hardware failed because no sufficient resources were
available or the hardware does not support the rule. This event might occur
when you modify a rule in an ACL that has been applied.
rule 10 comment This rule is
used in VPN rd.
Comment about ACL rule 10.
display acl accelerate
Use display acl accelerate to display ACL acceleration status for the specified ACLs.
Syntax
display acl accelerate { acl-number | all } [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
acl-number: Specifies an ACL number:
• 2000 to 2999 for IPv4 basic ACL
• 3000 to 3999 for IPv4 advanced ACL
all: Displays ACL acceleration status information for all IPv4 basic and IPv4 advanced ACLs.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see System Management Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display ACL acceleration status for all IPv4 basic and IPv4 advanced ACLs.
<Sysname> display acl accelerate all
S(Status): UTD -- up to date, OOD -- out of date
A(Accelerate): ACC -- accelerated, UNACC -- unaccelerated
Group Accelerate Status
--------------------------------------------------
2000 ACC UTD