F3215-HP Load Balancing Module Security Command Reference-6PW101

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module

Usage guidelines

This command displays ACL rules in config or depth-first order, whichever is configured.

Examples

# Display configuration and match statistics for all IPv6 basic and IPv6 advanced ACLs.

<Sysname> display acl ipv6 all

Basic IPv6 ACL 2000, named flow, 3 rules,

This is an IPv6 basic ACL.

Statistics is enabled

ACL's step is 5

rule 0 permit

rule 5 permit source 1::/64 (2 times matched)

rule 10 permit vpn-instance mk

Basic IPv6 ACL 2001, named -none-, 3 rules, match-order is auto,

ACL's step is 5

rule 10 permit vpn-instance rd

rule 10 comment This rule is used in VPN rd.

rule 5 permit source 1::/64

rule 0 permit

Table 4 Command output

Field Descri

tion

Basic IPv6 ACL 2000

Category and number of the ACL. The following field information is

about this IPv6 basic ACL 2000.

named flow The name of the ACL is flow. "-none-" means the ACL is not named.

3 rules The ACL contains three rules.

match-order is auto

The match order for the ACL is auto, which sorts ACL rules in depth-first

order. This field is not present when the match order is config.

This is an IPv6 basic ACL. Description of the ACL.

Statistics is enabled

The rule match counting is enabled for this ACL. The device does not

support counting rule matches.

Failed to enable statistics

Failed to enable rule match counting in this ACL. The device does not

support counting rule matches.

ACL's step is 5 The rule numbering step is 5.

rule 0 permit Content of rule 0.

5 times matched

There have been five matches for the rule. The statistic counts only ACL

matches performed by software.

This field is not displayed when no packets have matched the rule.

No statistics resource

Resources are not enough for counting matches for the ACL rules. The

device does not support counting rule matches.

Uncompleted

Applying the rule to hardware failed because no sufficient resources

were available or the hardware does not support the rule. This event

might occur when you modify a rule in an ACL that has been applied.