F3215-HP Load Balancing Module Security Command Reference-6PW101

36
number for the rule-id argument. In this approach, the end rule appears below the end remark.
Whichever approach you use, be consistent.
Examples
# Display the running configuration of IPv4 basic ACL 2000.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] display this
#
acl number 2000
rule 0 permit source 14.1.1.0 0.0.0.255
rule 5 permit source 10.1.1.1 0 time-range work-time
rule 10 permit source 192.168.0.0 0.0.0.255
rule 15 permit source 1.1.1.1 0
rule 20 permit source 10.1.1.1 0
rule 25 permit counting
#
return
# Add a start comment "Rules for VIP_start" and an end comment "Rules for VIP_end" for the rule range
10 to 25.
[Sysname-acl-basic-2000] rule 10 remark Rules for VIP_start
[Sysname-acl-basic-2000] rule 26 remark Rules for VIP_end
# Verify the configuration.
[Sysname-acl-basic-2000] display this
#
acl number 2000
rule 0 permit source 14.1.1.0 0.0.0.255
rule 5 permit source 10.1.1.1 0 time-range work-time
rule 10 remark Rules for VIP_start
rule 10 permit source 192.168.0.0 0.0.0.255
rule 15 permit source 1.1.1.1 0
rule 20 permit source 10.1.1.1 0
rule 25 permit counting
rule 26 remark Rules for VIP_end
#
return
Related commands
• display this
• display current-configuration (System Management Command Reference)
step
Use step to set a rule numbering step for an ACL.
Use undo step to restore the default.
Syntax
step step-value