F3215-HP Load Balancing Module Security Command Reference-6PW101

52
Parameters
isp-name: Specifies an ISP domain name, a case-insensitive string of 1 to 24 characters that cannot
contain the slash (/), backslash (\), colon (:), asterisk (*), question mark (?), left angle bracket (<), right
angle bracket (>), quotation marks ("), vertical bar (|), or at sign (@).
Usage guidelines
All ISP domains are in active state when they are created.
The system predefined ISP domain system cannot be deleted, but you can modify its configuration.
To delete the ISP domain that is used as the default ISP domain, you must first change it to a non-default
ISP domain by using the undo domain default enable command.
Examples
# Create ISP domain test, and enter ISP domain view.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test]
Related commands
• state
• display domain
domain default enable
Use domain default enable to specify the default ISP domain. Users without any domain name carried in
the usernames are considered to be in the default domain.
Use undo domain default enable to restore the default.
Syntax
domain default enable isp-name
undo domain default enable
Default
The default ISP domain is the system predefined ISP domain system.
Views
System view
Default command level
3: Manage level
Parameters
isp-name: Name of the ISP domain, a case-insensitive string of 1 to 24 characters.
Usage guidelines
There can be only one default ISP domain.
The specified domain must already exist. Otherwise, users without a domain name in the username
cannot pass authentication.
To delete the ISP domain that is used as the default ISP domain, you must first change it to a non-default
ISP domain by using the undo domain default enable command.