F3215-HP Load Balancing Module Security Configuration Guide-6PW101
102
To destroy a local asymmetric key pair:
Ste
p
Command
1. Enter system view.
system-view
2. Destroy a local asymmetric key pair.
public-key local destroy rsa
Specifying the peer public key on the local device
In SSH, to enable the local device to authenticate a peer device, specify the peer public key on the local
device. The device supports up to 20 peer public keys.
For information about displaying or exporting the host public key, see "Displaying or exporting the local
ho
st publi
c key."
To specify the peer public key on the local device:
Method Prere
q
uisites
Remarks
Import the public key
from a public key file
(recommended)
1. Save the host public key of the intended
asymmetric key pair in a file.
2. Transfer a copy of the file through FTP
or TFTP in binary mode to the local
device.
During the import process, the system
automatically converts the public key to
a string in Public Key Cryptography
Standards (PKCS) format.
Manually configure
the public key
—
input
or copy the key data
• Display and record the public key of the
intended asymmetric key pair.
• If the peer device is an HP device, use the
display public-key local public
command to view and record its public
key. A public key displayed by other
methods for the HP device may not be in
a correct format.
• The recorded public key must be in
the correct format, or the manual
configuration of a
format-incompliant public key will
fail.
• Always use the first method if you
are not sure about the format of the
recorded public key.
To import the host public key from a public key file to the local device:
Ste
p
Command
1. Enter system view.
system-view
2. Import the host public key from the public key file.
public-key peer keyname import sshkey filename
To manually configure the peer public key on the local device:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Specify a name for the public
key and enter public key view.
public-key peer keyname
N/A
3. Enter public key code view.
public-key-code begin N/A
4. Configure the peer public key.
Type or copy the key
Spaces and carriage returns are allowed
between characters.