F3215-HP Load Balancing Module Security Configuration Guide-6PW101

130
Displaying and maintaining SSH
Task Command Remarks
Display the source IP address or
interface configured for the SFTP
client.
display sftp client source [ | { begin | exclude
| include } regular-expression ]
Available in any view.
Display the source IP address or
interface information configured for
the Stelnet client.
display ssh client source [ | { begin | exclude
| include } regular-expression ]
Available in any view.
Display SSH server status
information or session information
on an SSH server.
display ssh server { status | session } [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display the mappings between
SSH servers and their host public
keys on an SSH client.
display ssh server-info [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display information about one or
all SSH users on an SSH server.
display ssh user-information [ username ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display the public keys of the local
key pairs.
display public-key local rsa public [ | { begin
| exclude | include } regular-expression ]
Available in any view.
Display the public keys of the SSH
peers.
display public-key peer [ brief | name
publickey-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Stelnet configuration examples
This section provides examples of configuring Stelnet.
When the LB module acts as an Stelnet server for password
authentication
Network requirements
As shown in Figure 43, you can log in to the LB module through the Stelnet client (SSH2) that runs on the
host. The LB module acts as the Stelnet server and uses password authentication. The username and
password of the client are saved on the LB module.
Figure 43 Network diagram
Configuration procedure
1. Configure the Stelnet server:
Stelnet client Stelnet server
Host LB
192.168.1.56/24
GE0/1
192.168.1.40/24