F3215-HP Load Balancing Module Security Configuration Guide-6PW101

132
Figure 44 Specifying the host name (or IP address)
c. Click Open to connect to the server.
If the connection is successfully established, the system asks you to enter the username and
password. After entering the username (client001) and password (aabbcc), you can enter the
command-line interface of the server.
When the LB module acts as an Stelnet server for publickey
authentication
Network requirements
As shown in Figure 45, you can log in to the LB module through the Stelnet client (SSH2) that runs on the
host. The LB module acts as the Stelnet server, adopting publickey authentication and the RSA public key
algorithm.
Figure 45 Network diagram
Stelnet client Stelnet server
Host LB
192.168.1.56/24
GE0/1
192.168.1.40/24