F3215-HP Load Balancing Module Security Configuration Guide-6PW101

137
Figure 50 Specifying the private key file
e. Click Open to connect to the server.
If the connection is successfully established, the system asks you to enter the username. After
entering the username (client002), you can enter the command-line interface of the server.
When the LB module acts as an Stelnet client for password
authentication
Network requirements
As shown in Figure 51, you can log in to the router through the Stelnet client running on the LB module.
The router acts as the Stelnet server and uses password authentication. The username and password of
the client are saved on the router.
Figure 51 Network diagram
Configuration procedure
1. Configure the Stelnet server:
# Generate the RSA key pairs.
<Router> system-view
[Router] public-key local create rsa