F3215-HP Load Balancing Module Security Configuration Guide-6PW101

198
Figure 105 Enabling the blacklist feature
3. Add a blacklist entry for Host D:
a. In the Blacklist Configuration area, click Add.
b. On the page that appears (see Figure 106), enter the IP address 5.5.5.5, select Permanence.
c. Click Apply.
Figure 106 Adding a blacklist entry for Host D
d. In the Blacklist Configuration area, click Add again.
e. On the page that appears (see Figure 107), enter the IP address 192.168.1.5, select Hold Time
and set the lifetime of the entry to 50 minutes.
f. Click Apply.
Figure 107 Adding a blacklist entry for Host C
4. Configure scanning detection for the untrusted zone, as shown in Figure 108:
a. From the navigation tree, select Security > Intrusion Detection > Scanning Detection.
b. Select the security zone Untrust.
c. Select Enable Scanning Detection.