F3215-HP Load Balancing Module Security Configuration Guide-6PW101

15
If the destination zone belongs to a different VD than the source zone, specify the destination zone in this
format: vd-name-zone-id. For example, to use security zone named 2 on VD test as the destination zone,
you must enter test-2.
To create an interzone instance:
Ste
p
Command Remarks
1. Enter system view. system-view N/A
2. Enter VD system view.
switchto vd vd-name
Required for a security zone of a
non-default VD.
3. Create an interzone
instance and enter
interzone instance view.
interzone source source-zone-name
destination destination-zone-name
By default, no interzone instance
exists.