F3215-HP Load Balancing Module Security Configuration Guide-6PW101

Configuring ACLs in the Web interface

Recommended configuration procedure

Ste

Remarks

1. Creating an ACL.

Required.

The category of the created ACL depends on the ACL number that

you specify.

2. Configuring an ACL rule:

{ Configuring a basic ACL rule

{ Configuring an advance ACL rule

{ Configuring an Ethernet frame

header ACL rule

Required.

Complete one of the tasks according to the ACL category.

3. Configuring ACL acceleration.

Optional.

Necessary only when the ACL contains a large number of ACL

rules.

Only basic IPv4 ACLs and advanced IPv4 ACLs support ACL

acceleration.

ACL acceleration is not available for ACLs that contain a

non-contiguous wildcard mask, for example, 0.255.0.255.

After you modify an IPv4 ACL with ACL acceleration enabled,

disable and re-enable ACL acceleration to ensure correct rule

matching.

Creating an ACL

1. Select Security > ACL from the navigation tree.

Figure 11 ACL list

2. Click Add.