F3215-HP Load Balancing Module Security Configuration Guide-6PW101

A username configured on the RADIUS server is in the format $enablevel$, where level specifies

the privilege level to which the user wants to switch. \

Figure 34 Configuring a username for privilege level switching (take $enab1$ for example)

Figure 35 List of the usernames for privilege level switching

3. Verify the configuration.

After the configuration is complete, the user can Telnet to LB module and use username test@bbb

and password aabbcc to enter the user interface of LB module, and access all level 0 commands.

<LB> telnet 192.168.1.70

Trying 192.168.1.70 ...

Press CTRL+K to abort

Connected to 192.168.1.70 ...

******************************************************************************