F3215-HP Load Balancing Module Security Configuration Guide-6PW101

92
Task Remarks
Enabling password control Required.
Setting global password control parameters Optional.
Setting user group password control parameters Optional.
Setting local user password control parameters Optional.
Setting super password control parameters Optional.
Setting a local user password in interactive mode Optional.
Enabling password control
1. Enable the global password control feature in system view.
Password control configurations take effect only after the password control feature is enabled
globally.
2. Enable password control functions individually.
The following password control functions need to be enabled individually after the password
control feature is enabled globally:
{ Password aging
{ Minimum password length
{ Password history
{ Password composition checking
To enable password control:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable the global password
control feature.
password-control enable
By default, the global password
control feature is disabled.
3. Enable a specific password
control function.
password-control { aging |
composition | history | length }
enable
Optional.
All of the four password control
functions are enabled by default.
After global password control is enabled, local user passwords configured on the device are not
displayed when you use the corresponding display command.
Setting global password control parameters
The action specified the password-control login-attempt command takes effect immediately, and thus
affects the users already in the password control blacklist. Other password control configurations take
effect only for users logging in later and passwords configured later.
To set global password control parameters:
Ste
p
Command Remarks
1. Enter system view.
system-view
N/A