F3215-HP Load Balancing Module System Maintenance Command Reference-6PW101

110
Syntax
mount medium-name
Default
A storage medium is automatically mounted and in mounted state after being connected to the device,
and you can use it without mounting it.
Views
User view
Default command level
3: Manage level
Parameters
medium-name: Name of a storage medium partition, for example, cfa0 or cfa1.
Usage guidelines
This command applies only when the device is in unmounted state.
Do not remove the storage medium or swap a card when mounting or unmounting the storage medium,
or when you are processing files on the storage medium. Otherwise, the file system could be damaged.
When a storage medium is connected to a lower version system, the system might not be able to
recognize the storage medium automatically, in which case you must use the mount command for the
storage medium to function normally.
Before removing a mounted storage medium from the system, unmount it to avoid damaging the storage
medium.
To mount a partitioned storage medium, you must mount all the partitions individually, instead of
mounting the CF card as a whole.
Examples
# Mount a CF card.
<Sysname> mount cfa0:
% Mount cfa0: successfully.
Related commands
umount
move
Use move to move a file.
Syntax
move fileurl-source fileurl-dest
Views
User view
Default command level
3: Manage level
Parameters
fileurl-source: Name of the source file.