F3215-HP Load Balancing Module System Maintenance Command Reference-6PW101

bytes=56 Sequence=1 hop limit=64 time = 62 ms

Reply from 2001::1

bytes=56 Sequence=2 hop limit=64 time = 26 ms

Reply from 2001::1

bytes=56 Sequence=3 hop limit=64 time = 20 ms

Reply from 2001::1

bytes=56 Sequence=4 hop limit=64 time = 4 ms

Reply from 2001::1

bytes=56 Sequence=5 hop limit=64 time = 16 ms

--- 2001::2 ping statistics ---

5 packet(s) transmitted

5 packet(s) received

0.00% packet loss

round-trip min/avg/max = 4/25/62 ms

The "hop limit" field in this prompt information has the same meaning as the "ttl" field in the prompt

information displayed by the IPv4 ping command, indicating the TTL value in the ICMPv6 echo request.

For the description on other fields, see Table 1.

tracert

Use tracert to trace the path the packets traverse from source to destination.

Syntax

vpn-instance-name | -w timeout ] * host

Views

Any view

Default command level

0: Visit level

Parameters

-a source-ip: Specifies the source IP address of a tracert packet. It must be a legal IP address configured

on the device. If this parameter is not provided, the source IP address of an ICMP echo request is the

primary IP address of the outbound interface of the tracert packet.

-f first-ttl: Specifies the first TTL (the allowed number of hops for the first packet). It ranges from 1 to 255

and defaults to 1, and must be less than the maximum TTL.

-m max-ttl: Specifies the maximum TTL, or, the maximum allowed number of hops for a packet. It ranges

from 1 to 255 and defaults to 30, and must be greater than the first TTL.

-p port: Specifies the UDP port number of the destination, which ranges from 1 to 65535 and defaults to

33434. You do not need to modify this parameter.

-q packet-number: Specifies the number of probe packets sent each time, which ranges from 1 to 65535

and defaults to 3.

-vpn-instance vpn-instance-name: Specifies the VPN to which the destination belongs, where

vpn-instance-name is a case-sensitive string of 1 to 31 characters. If the destination is on the public

network, do not specify this option.