F3215-HP Load Balancing Module System Maintenance Command Reference-6PW101

158
Table 34 Command output
Field Descri
p
tion
Received
packets
Total Total number of UDP packets received.
checksum error Total number of packets with incorrect checksum.
shorter than header Number of packets with data shorter than head.
data length larger than packet Number of packets with data longer than packet.
unicast(no socket on port) Number of unicast packets with no socket on port.
broadcast/multicast(no socket on
port)
Number of broadcast/multicast packets without socket
on port.
not delivered, input socket full
Number of packets not delivered to an upper layer due to
a full socket cache.
input packets missing pcb cache
Number of packets without matching protocol control
block cache.
Sent packets Total Total number of UDP packets sent.
Related commands
reset udp statistics
ip redirects enable
Use ip redirects enable to enable sending ICMP redirection packets.
Use undo ip redirects to disable sending ICMP redirection packets.
Syntax
ip redirects enable
undo ip redirects
Default
Sending ICMP redirection packets is disabled.
Views
System view
Default command level
2: System level
Examples
# Enable sending ICMP redirect packets.
<Sysname> system-view
[Sysname] ip redirects enable
ip ttl-expires enable
Use ip ttl-expires enable to enable sending ICMP timeout packets.
Use undo ip ttl-expires to disable sending ICMP timeout packets.