F3215-HP Load Balancing Module System Maintenance Command Reference-6PW101

22
Views
Interface view
Default command level
2: System level
Examples
# Disable port GigabitEthernet0/1 from generating link up/down logs.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] undo enable log updown
info-center channel name
Use info-center channel name to name a channel.
Use undo info-center channel to command to restore the default name for a channel.
Syntax
info-center channel channel-number name channel-name
undo info-center channel channel-number
Default
See Table 3 for information about default channel names and channel numbers.
Views
System view
Default command level
2: System level
Parameters
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a name for the channel, a case-insensitive string of 1 to 30 characters. It must
be a combination of letters and numbers and start with a letter.
Examples
# Name channel 0 as abc.
<Sysname> system-view
[Sysname] info-center channel 0 name abc
info-center console channel
Use info-center console channel to specify the console output channel. The system uses this channel to
output information to the console.
Use undo info-center console channel to restore the default console output channel.
Syntax
info-center console channel { channel-number | channel-name }
undo info-center console channel