F3215-HP Load Balancing Module System Maintenance Command Reference-6PW101

24
info-center format unicom
Use info-center format unicom to set the UNICOM format for system information sent to a log host.
Use undo info-center format to restore the default.
Syntax
info-center format unicom
undo info-center format
Default
The format for the system information sent to a log host is HP.
Views
System view
Default command level
2: System level
Usage guidelines
System information sent to a log host has two formats: HP and UNICOM. For more information, see
System Maintenance Configuration Guide.
Examples
# Set the UNICOM format for system information sent to a log host.
<Sysname> system-view
[Sysname] info-center format unicom
info-center logbuffer
Use info-center logbuffer to configure information output to the log buffer.
Use undo info-center logbuffer to disable information output to the log buffer.
Syntax
info-center logbuffer [ channel { channel-number | channel-name } | size buffersize ] *
undo info-center logbuffer [ channel | size ]
Default
The system outputs information to the log buffer through channel 4 (logbuffer) and the default buffer size
is 512.
Views
System view
Default command level
2: System level
Parameters
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a channel by its name, a default name or a self-defined name. For information
about configuring a channel name, see info-center channel name.