F3215-HP Load Balancing Module System Maintenance Command Reference-6PW101

26
Default command level
2: System level
Parameters
freq-sec: Specifies a saving interval in the range of 1 to 86400 seconds.
Examples
# Configure the interval for saving system information to the log file as 60000 seconds.
<Sysname> system-view
[Sysname] info-center logfile frequency 60000
info-center logfile size-quota
Use info-center logfile size-quota to set the maximum storage space reserved for a log file.
Use undo info-center logfile size-quota to restore the default maximum storage space reserved for a log
file.
Syntax
info-center logfile size-quota size
undo info-center logfile size-quota
Default
The default storage space reserved for a log file is 10 MB.
Views
System view
Default command level
2: System level
Parameters
size: Specifies the maximum storage space reserved for a log file, in the range of 1 to 10 MB.
Examples
# Set the maximum storage space reserved for a log file to 6 MB.
<Sysname> system-view
[Sysname] info-center logfile size-quota 6
info-center logfile switch-directory
Use info-center logfile switch-directory to configure the directory where a log file is saved.
Syntax
info-center logfile switch-directory dir-name
Default
A log file is saved in the logfile directory under the root directory of the storage device. If the device has
been partitioned, the log file is saved in the second partition of the storage device.
Views
System view