F3215-HP Load Balancing Module System Maintenance Command Reference-6PW101

33
Parameters
dir-name: Specifies a directory by its name, a string of 1 to 64 characters.
Usage guidelines
The specified directory must have been created.
This configuration made by this command cannot survive a system restart.
For a device that has been partitioned, the security log file is saved in the seclog directory in the second
partition of the storage device.
A local user can use this command only after being authorized as the security log administrator by the
system administrator through the authorization-attribute user-role security-audit command. For more
information about the authorization-attribute command, see Security Command Reference.
Examples
# Set the directory to save the security log file to cfa0:/test.
<Sysname> mkdir test
%Created dir cfa0:/test.
<Sysname> info-center security-logfile switch-directory cfa0:/test
info-center snmp channel
Use info-center snmp channel to configure the SNMP output channel. The system uses this channel to
output information to the SNMP module.
Use undo info-center snmp channel to restore the default SNMP output channel.
Syntax
info-center snmp channel { channel-number | channel-name }
undo info-center snmp channel
Default
The system outputs information to the SNMP module through channel 5 (snmpagent).
Views
System view
Default command level
2: System level
Parameters
channel-number: Specifies a channel by its number, in the range of 0 to 9.
channel-name: Specifies a channel by its name, a default name or a self-defined name. For information
about configuring a channel name, see the info-center channel name command.
Examples
# Output system information to the SNMP module through channel 6.
<Sysname> system-view
[Sysname] info-center snmp channel 6
Related commands
display snmp-agent